Gumout Dot 3 Brake Fluid, 12 Oz, 1 Bottle Each, By Illinois Tool Works Inc
- Oxidation and Corrosion Resistance
- High Temperature Stability
- Low Temperature Fluidity
Clean the top of the Master Cylinder reservoir and remove the fill cap. Add fluid to the level specified by manufacturer and replace fill cap. 1. Follow vehicle manufacturer's recommendations when adding brake fluid. 2.Keep break fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. 3. Store brake fluid only in its original container, keep container clean and tightly closed to prevent absorption of moisture. 4. Caution: DO NOT REFILL CONTAINER, AND DO NOT USE FOR OTHER LIQUIDS. 5. Note: If spilled on paint surface, rinse immediately with water. DO NOT rub or wipe the area.
Never wash cylinders or parts with gasoline, kerosene or oil. Avoid spilling fluid on car finish or brake lining. Contains Diethylene Glycol, Glycol Ethers, Polyglycols. Harmful if Swallowed. DO NOT store in open or unlabeled containers. Avoid contact with eyes, skin or clothing. Wash skin with soap and water after handling. If Swallowed, Immediately contact a Physician or Poison Control Center. In case of eye contact, flush thoroughly with water. If irritation persists, contact a Physician. KEEP OUT OF REACH OF CHILDREN.
Diethylene Glycol, Glycol Ethers, Polyglycols
Made In: USA