Helping Hand Washing Machine Lint Traps, 2 Count, 1 Each, By World and Main
- Fights to Keep Your Drain Clog Resistant
- Aluminum Mesh
- Two traps on each card
- The Original
1. Slide the open end of Lind Trap 2 inches onto the discharge hose of the washing machine.
2. Wrap clamp (supplied) around Lind Trap and hose.
3. With ridges on the outside, pull the pointed end of clamp through the slot and pull tightly.
To remove, just pinch the clamp release as shown in the diagram and pull apart.
CAUTION: When Lint Trap becomes half full, discard. Failure to do so may result in drain hose clogging and flooding or malfunction of the washing machine. Use only on washing machine discharge hoses which empty into a laundry tub or sink. Do not use on a hose that empties into or connects to a standpipe.
Manufactured By World and Main